Ultra-High-Pressure Liquid Chromatographic method for the analysis of tocopherols in human colostrum and milk

A rapid, highly sensitive and direct Ultra-High-Pressure Liquid Chromatographic method was developed and validated for quantifying δ-, β + γ-, and α-tocopherol in human colostrum and milk. Two reversed-phase chromatographic columns and two detectors (Fluorescence Detector or FD and Photodiode Detector Array or PDA) were used and both methods were independently validated. Two internal standards were selected according to the detector used. Recoveries ranged from 96.71% to 103.55% and the relative standard deviations for the within-day precision were below 6% (PDA) and 3% (FD). Both approaches enabled to achieve low detection limits, on the order of ng (PDA) or pg (FD). Only 300 μL of sample and a chromatographic run of less than 1.6 min were enough to efficiently quantify the isomers in the colostrum and milk of Spanish women.     

Phase behavior of bile acid/lipid/water systems containing model dietary lipids

Dietary lipids are solubilized in bile acid micelles in the small intestine. In the present study, we investigate the phase behavior of bile acid/model rapeseed oil (or model beef tallow)/water systems to predict interfacial phenomena during consumption of a variety of foods. The structures of molecular assemblies are identified based on polarizing microscope images, wide-angle X-ray diffraction (WAXD) and small-angle X-ray scattering (SAXS). The results of in vitro tests suggest that an increase in the intake of model rapeseed oil causes the formation of multi-lamellar vesicles and lamellar liquid crystals. The molecules in the lamellar liquid crystal are formed highly ordered layer structure with the spacing of 8.8 nm along the c-axis, while monoclinic packed structure is constructed as two-dimensional structure in ab-plane due to bulky molecular structures of bile acid and unsaturated fatty acid. When the model beef tallow composition in the model system is more than several wt.%, stearic acid crystals are extracted. Moreover, bicarbonate ions are important ingredients to solubilize >10 wt.% of the model lipids. These phase transitions might be induced by the addition of dietary lipids in vivo during the consumption of oil or meat. Our findings are significant for understanding the lipid absorption process in the small intestine, and for developing medical and healthcare products.     

Spectral parameters and Hamaker constants of silicon hydride compounds and organic solvents

Cyclopentasilane (CPS) and polydihydrosilane, which consist of hydrogen and silicon only, are unique materials that can be used to produce intrinsic silicon film in a liquid process, such as spin coating or an ink-jet method. Wettability and solubility of general organic solvents including the above can be estimated by Hamaker constants, which are calculated according to the Lifshitz theory. In order to calculate a Hamaker constant by the simple spectral method (SSM), it is necessary to obtain absorption frequency and function of oscillator strength in the ultraviolet region. In this report, these physical quantities were obtained by means of an optical method. As a result of examination of the relation between molecular structures and ultraviolet absorption frequencies, which were obtained from various liquid materials, it was concluded that ultraviolet absorption frequencies became smaller as electrons were delocalized. In particular, the absorption frequencies were found to be very small for CPS and polydihydrosilane due to σ-conjugate of their electrons. The Hamaker constants of CPS and polydihydrosilane were successfully calculated based on the obtained absorption frequency and function of oscillator strength.     

Dispersive liquid–liquid–liquid microextraction combined with liquid chromatography for the determination of chlorophenoxy acid herbicides in aqueous samples

A novel sample preparation method “Dispersive liquid–liquid–liquid microextraction” (DLLLME) was developed in this study. DLLLME was combined with liquid chromatography system to determine chlorophenoxy acid herbicide in aqueous samples. DLLLME is a rapid and environmentally friendly sample pretreatment method. In this study, 25 μL of 1,1,2,2-tetrachloroethane was added to the sample solution and the targeted analytes were extracted from the donor phase by manually shaking for 90 s. The organic phase was separated from the donor phase by centrifugation and was transferred into an insert. Acceptor phase was added to this insert. The analytes were then back-extracted into the acceptor phase by mixing the organic and acceptor phases by pumping those two solutions with a syringe plunger. After centrifugation, the organic phase was settled and removed with a microsyringe. The acceptor phase was injected into the UPLC system by auto sampler. Fine droplets were formed by shaking and pumping with the syringe plunger in DLLLME. The large interfacial area provided good extraction efficiency and shortened the extraction time needed. Conventional LLLME requires an extraction time of 40–60 min; an extraction time of approximately 2 min is sufficient with DLLLME. The DLLLME technique shows good linearity (r² ≥ 0.999), good repeatability (RSD: 4.0–12.2% for tap water; 5.7–8.5% for river water) and high sensitivity (LODs: 0.10–0.60 μg/L for tap water; 0.11–0.95 μg/L for river water).     

Liquid phase deposition synthesis of hexagonal molybdenum trioxide thin films

Hexagonal molybdenum trioxide thin films with good crystallinity and high purity have been fabricated by the liquid phase deposition (LPD) technique using molybdic acid (H₂MoO₄) dissolved in 2.82% hydrofluoric acid (HF) and H₃BO₃ as precursors. The crystal was found to belong to a hexagonal hydrate system MoO₃.nH₂O (n~0.56). The unit cell lattice parameters are a=10.651 Å, c=3.725 Å and V=365.997 Å³. Scanning electron microscope (SEM) images of the as-deposited samples showed well-shaped hexagonal rods nuclei that grew and where the amount increased with increase in reaction time. X-ray photon electron spectroscopy (XPS) spectra showed a Gaussian shape of the doublet of Mo 3d core level, indicating the presence of Mo⁶⁺ oxidation state in the deposited films. The deposited films exhibited an electrochromic behavior by lithium intercalation and deintercalation, which resulted in coloration and bleaching of the film. Upon dehydration at about 450 °C, the hexagonal MoO₃.nH₂O was transformed into the thermodynamically stable orthorhombic phase.     

Photocontrol of supramolecular architecture in azopolymers: Achiral and chiral aggregation

The absorption spectra and circular dichroism responses upon irradiation with 488 nm circularly polarized light (CPL) have been studied on polymeric films processed from two nematic copolymers containing azobenzene chromophores. Influence of the aggregation and orientation of azobenzenes on the photoinduced chiroptical properties has been analyzed. Moreover, polymeric films and 4 μm planar cells filled with the copolymers were studied by polarized optical microscopy (POM) with the aim of investigating the change of macroscopic optical properties and textures of azopolymers upon irradiation with CPL.     

Effect of analyte properties on the kinetic performance of liquid chromatographic separations

Advances in modern high-performance liquid chromatography (HPLC) have led to increased interest in the comparison of the ultimate performance limits of methodologies aimed at increasing the resolving power per unit time. Kinetic plot-based methods have proven invaluable in facilitating such evaluations. However, in bridging the gap between fundamental comparisons and the eventual practical applicability of kinetic performance data, the effect of analyte properties have thus far largely been neglected. Using pharmaceutical compounds as representative real-life analytes, it is demonstrated that noteworthy differences in the optimal kinetic performance of a chromatographic system are observed compared to data for common test compounds. For a given stationary phase particle size, higher optimal- and maximum plate numbers, corresponding to increased analysis times, are measured for pharmaceutical compounds. Moreover, it is found that the optimal particle size/maximum pressure combination depends on the analyte under investigation, with the beneficial range of efficiencies for small particles shifted towards higher plate numbers for drug molecules. It is further demonstrated that the pH of the mobile phase plays a crucial role in determining the kinetic performance of pharmaceutical compounds. These data clearly indicate that data for test compounds do not reflect the performance attainable for pharmaceutical compounds and highlights the importance of using real-life samples to perform kinetic evaluations.     

Potential of supramolecular solvents for the extraction of contaminants in liquid foods

Amphiphile-based supramolecular solvents (ASSs), which are water immiscible liquids consisting of supramolecular aggregates in the nano- and micro-scale regimes dispersed in a continuous phase, were assessed for the extraction of trace contaminants in liquid foods. The ASS selected was made up of reversed micelles of decanoic dispersed in tetrahydrofuran (THF)-water and the contaminants used as a model were bisphenol A (BPA), ochratoxin A (OTA) and benzo(a)pyrene (BaPy). The influence of matrix components on the extractant solvent production, extraction recoveries and actual concentration factors was investigated by using commercial foods such as wine and wine-based products, beer, soft drinks and tea and coffee brews, and/or aqueous synthetic solutions containing specific food matrix components. The method involved the addition of decanoic acid (80mg) and THF (0.8-1.7mL) to the food sample (15mL), stirring of the mixture for 5min, centrifugation for 10min and analysis of 10-20microL of the extract by liquid chromatography coupled to fluorimetry for OTA and BaPy or to mass spectrometry for BPA. No clean-up of the crude extracts was required for any of the samples analysed. The quantification limits for the contaminants (14-31ngL(-1), 0.37-0.39ngL(-1) and 562-602ngL(-1) for OTA, BaPy and BPA, respectively) were far below their respective European legislative threshold limits. Recoveries for food samples were in the ranges 79-93%, 90-96% and 78-82% for OTA, BaPy and BPA, respectively, with relative standard deviations ranging from 1 to 7%, and actual concentrations factors between 65 and 141. The methods developed were applied to the determination of the target compounds in a variety of commercial foods. OTA was found in vinegar, must and beer samples, the concentrations ranging from 92 to 177ngL(-1), BaPy was quantified in samples of tea and coffee at concentrations between 1.5 and 16.6ngL(-1) whereas BPA was detected in two canned soft drinks and quantified in one of them (tea beverage) at a level of 2.3microgL(-1).     

Determination of 76 pharmaceutical drugs by liquid chromatography–tandem mass spectrometry in slaughterhouse wastewater

A multi-residue method for the analysis of 76 pharmaceutical agents of nine classes of drugs (tetracyclines, macrolides, fluoroquinolones, β-agonists, β-blockers, diuretics, sedatives, sulfonamides and chloramphenicol) in slaughterhouse wastewater and a receiving river is presented. After simultaneous extraction with an Oasis HLB solid-phase extraction (SPE) cartridge and further purification using an amino SPE cartridge, analytes were detected by liquid chromatography–electrospray ionization-tandem mass spectrometry in positive or negative ion mode. Standard addition was used for quantification to overcome unavoidable matrix effects during ESI-MS analysis. Recoveries for most analytes based on matrix-matched calibration in different test matrices were >60%. The method quantification limits of 76 pharmaceuticals were in the range 0.2–30 ng/L. Nineteen compounds of 76 drugs were found in raw and treated slaughterhouse wastewater from four main slaughterhouses in Beijing. Sulfanamides (sulfanilamide, sulfameter), fluoroquenones (ofloxacin, pefloxacin, norfloxacin, ciprofloxacin, enrofloxacin), tetracyclines (tetracycline, oxytetracycline) and macrolides (kitasamycin, tylosin, erythromycin) were most frequently detected, with the highest levels up to ∼3 μg/L in slaughterhouse wastewater and ∼1 μg/L in treated wastewater. Illicit drugs for animal feeding such as clenbuterol and diazepam were commonly detected in slaughterhouse wastewater. These analytes were also observed in a river receiving slaughterhouse wastewater, with a highest level of up to 0.2 μg/L.     

Foundations of retention in partition chromatography

The connection between the observable output in column chromatography (retention time, retention volume, retention factor, separation factor, etc.) and system properties (hold-up volume, pressure, temperature, isotherm behavior, etc.) is discussed from a practical and mechanistic perspective for gas–liquid chromatography, reversed-phase liquid chromatography, supercritical fluid chromatography, micellar electrokinetic chromatography, and capillary electrochromatography. The unifying feature of these techniques is that retention can be described by a partition model, although not always exclusively. When over simplistic system models are used to explain variation in retention parameters they frequently mask the true reasons for poor repeatability and difficulties in transfer between system. Methods employing relative retention afford higher precision but may contain residual uncorrected errors. For those systems with several separate mechanisms contributing to retention the effective retention parameters can no longer be interpreted by simple partition models. The broadly based and practically focused material in this article affords an illustration of the often complicated relationship between system properties and retention, and the dangers that lurk in simplified retention models if the validity of their underlining approximations is not appropriate for the system under study.